Dell 1135N Manual Tray Paper

The HVPS board creates the high voltage of THVMHVSupplyDev and supplies it to the developer portion f The HVPS portion takes the 24V and outputs the high voltage for THVMHVBIAS, and supplied to the high voltage, OPC cartridge, and transfer roller for optimum latent image and toner transfer quality.

Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and names of their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Power Cord 4 Thumbnail 5 1.

MAIN 7 2. COVER 9 3.

COVER-MIDDLE ASSY 11 4.

This printer should only be serviced by a qualied service technician.

Use only Dell replacement parts There are no user serviceable parts inside the printer.

Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and create electric shock or re haz-.

Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions.

Take care to note the exact location of parts and also cable routing before dismantling any part of the machine.

The printer weighs 23.34 lbs (Dell 1133) 25.44 lbs (Dell 1133n), ensure the printer is installed on a level surface, capable of supporting its weight.

Failure to do so could cause the printer to tip or fall possibly causing personal injury or damaging the printer.

Such components are commonly called Electrostatically Sensitive (ES) Devices or ESDs.

Examples of typical ESDs are: integrated circuits, some eld effect transistors, and semiconductor chip components.

The techniques outlined below should be followed to help reduce the incidence of component damage caused by static electricity.

Print Copy Speed.

Interfaces 23 ppm in letter One USB port One 10100 Base TX network connector (Dell 2.

See below for product specications.

General Specications Items Dell 1133 Dell 1135n Net Dimension 416 x 409 x 275.8 mm 416 x 415.4 x 318.9 mm (W x D x H) (16.4 x 16.1 x 10.9 inches).

Copy Speed is based on Single Document Multiple Copy Condition: Standard resolution, MMR(JBIG), Maximum modem speed, Phase C.

Dell 1135N Manual Tray Paper

Document feeder cover Handle Toner cartridge Document feeder width guides Tray 1 Manual tray paper width guides.

Network port Power receptacle USB port Rear door Telephone line socket Rear door handle Extension telephone socket (EXT) 2-11 Service Manual.

It fuses the toner on to the paper by heat and pressure to complete the printing job.

Thermostat When a heat lamp is overheated, a Thermostat cuts off the main power to prevent over- heating.

Thermostat Type: Non- Contact type THERMOSTAT - Control Temperature: 170 2) Thermistor.

In the toner cartridge, the OPC unit and the developing unit are contained in one assembly.

The OPC unit houses the OPC drum and charging roller; the toner cartridge unit houses the toner, supply roller, developing roller, and blade (Doctor blade).

The CPU is functioned as the bus control, IO handling, drivers, and PC interface.

The main board sends the Current Image of Video data to the LSU and The CPU on Main PBA manages the circuits for the motors: paper feed, paper path, clutches, pre- transfer lamp, current control to driver components, and fan driving.

This one sensor is used to detect both an empty paper condition, and as to whether e.g.

When a printing job comes to the CPU, the CPU initializes the pickup action regardless of the state of the sensor.

Dell 1135N Driver For Mac